Optical Fiber / Fiber / Aerial
Self-supporting aerial fig. 8-cable (7x1.0) with 12 - 48 single-mode fibers E9/125 SMF 28e+™
Design and special properties
Principle drawing for: A-DT2Y 4x12 E9/125 0,36F3,5 + 0,22H18 LG (7x1,0)
- Self-supporting aerial fig. 8-cable with steel suspension strand for installation on poles (span length
dependence of the environmental conditions and the installation conditions)
- Loose tube tubes design, tubes filled with a thixotropic gel
- Dry cable core: waterswellable elements over the cable core.
- Mono mode fibers fully compliant to standard ITU G.652D with low attenuation throughout the 1310 nm to 1550 nm wavelength range
- Steel suspension strand 7 x 1.0 mm, other options are available on request
- PE jacket, black
- The used single mode fibers CORNING SMF 28e+™ is fully compliant to standard
ITU G.652 D (reduced OH- peak) showing low attenuation throughout the 1285 nm to 1625 nm wavelength range
- Similar Eircom-specification Rev. 1.0 for fiber and loose tube coloring
Colouring
Fibers: white, red, yellow, green, blue, grey, brown, black, violet, pink, orange, turquoise
Buffer tubes: black, brown, red, orange
Outer jacket: black
Cable printing:
<meter>
EIRCOM CORNING <year>
OPTICAL CABLE
<fiber count>
SMF
•Optical and mechanical: |
| •Mode field diameter at 1310 nm |
[μm] |
9.4 ± 0.4 |
| •Cladding diameter |
[μm] |
125.0 ± 0.7 |
| •Coating diameter |
[μm] |
245 ± 5 |
| •Typical attenuation at 1310 nm |
[dB/km] |
≤ 0.36 |
| •Typical attenuation at 1550 nm |
[dB/km] |
≤ 0.22 |
| •Typical attenuation at 1383 nm |
[dB/km] |
≤ 0.36 |
| •Dispersion in the range 1285 to 1330 nm |
[ps/(nm*km)] |
≤ 3.4 |
| •Typical dispersion in the range 1285 to 1330 nm |
[ps/(nm*km)] |
≤ 2,7 |
| •Dispersion at 1550 nm |
[ps/(nm*km)] |
≤ 18 |
| •Cable cutoff Wavelength (λcc) |
[nm] |
≤ 1260 |
| •PMD Link Design value*) |
Ps/vkm |
≤ 0.06 |
| •PMD maximum individual fiber |
Ps/vkm |
≤ 0.2 |
•*) Complies with IEC 60794-3:2001, Section 5.5 Method 1, (m=20, Q= 0,01 %) Sept. 2001
•The fibers are fully in compliance with ITU G.652.D and annexes.
•Other options are available on request. |
Characteristics of fibers E9/125 SMF 28e+™
CCS reserves the right to improve, enhance, and modify the features and specifications of CCS’s products without prior notification. The information in this data sheet has been reproduced in good faith and is accurate, to the best of CCS’s knowledge, at the time of printing. However, CCS makes no warranty as to, and will not be liable on any basis for, the information contained within this data sheet.
©2009 Agtec Ireland Limited
Unit 21, Ashbourne Business Centre, Ballybin Road, Ashbourne, Co. Meath, Ireland.
t: 353-1-8359565 f: 353-1-8359657 e: sales@agtec.ie
Optical Fiber shortcuts...
Fiber
UG
Aerial
Engineered Solutions
Fiber Optic Cable Accessories
