Optical Fiber / Fiber / UG
Fiber optic indoor cable with 48 Corning® single-mode fibers E9/125 SMF-28e®, stranded
loose tube design, LSZH™ sheath; non-metallic
Design and special properties
Example: J-DH 4x12 E9/125 0.38F3.5 + 0.24H18 LG YE
- The fiber optic indoor cables are particularly suitable for placing and pulling into cable
conduits and shafts inside buildings and in the building riser between floor distributers
- Indoor cables with small diameter, low weight and low fire load rating
- LSZH™ sheath, yellow
- Low-smoke to IEC 61034 and zero-halogen (LS ZH™)
- Flame-retardant to IEC 60332-1 and non-corrosive to IEC 60754-2 (FRNC) and DIN VDE 0472 part 813
- All-dielectric cable construction requires no grounding or bonding
- The used Corning® single-mode fibers SMF-28e® are fully compliant to standard ITU-T G.652.D
(reduced OH- peak) showing low attenuation throughout the 1285 nm to 1625 nm wavelength range
- DIN VDE standard for fiber and loose tube coloring
Colouring
Fibers:
blue, orange, green, brown, grey, white, red, black, yellow, violet, pink, turquoise
Buffer tubes: red, yellow, yellow, yelloworange
Filling elements: natural, to fill up the cable core
Outer jacket: yellow
Cable printing:
<meter marking>
J-DH
sine
48 E
……T
Method: Ink Jet printing, black
•Optical and mechanical: |
| •Mode field diameter at 1310 nm |
[μm] |
9.2 ± 0.4 |
| •Cladding diameter |
[μm] |
125.0 ± 0.7 |
| •Coating diameter |
[μm] |
245 ± 5 |
| •Typical attenuation at 1310 nm |
[dB/km] |
≤ 0.36 |
| •Typical attenuation at 1550 nm |
[dB/km] |
≤ 0.22 |
| •Typical attenuation at 1383 nm |
[dB/km] |
≤ 0.36 |
| •Dispersion in the range 1285 to 1330 nm |
[ps/(nm*km)] |
≤ 3.5 |
| •Typical dispersion in the range 1285 to 1330 nm |
[ps/(nm*km)] |
≤ 2,7 |
| •Dispersion at 1550 nm |
[ps/(nm*km)] |
≤ 18 |
| •Cable cutoff Wavelength (λcc) |
[nm] |
≤ 1260 |
•The fibers are fully in compliance with ITU-T G. 652.D and annexes.
•Other options are available on request. |
Characteristics of single-mode fibers E9/125 SMF-28e®
CCS reserves the right to improve, enhance, and modify the features and specifications of CCS’s products without prior notification. The information in this data sheet has been reproduced in good faith and is accurate, to the best of CCS’s knowledge, at the time of printing. However, CCS makes no warranty as to, and will not be liable on any basis for, the information contained within this data sheet.
©2009 Agtec Ireland Limited
Unit 21, Ashbourne Business Centre, Ballybin Road, Ashbourne, Co. Meath, Ireland.
t: 353-1-8359565 f: 353-1-8359657 e: sales@agtec.ie
Optical Fiber shortcuts...
Fiber
UG
Aerial
Engineered Solutions
Fiber Optic Cable Accessories
