Optical Fiber / Fiber / UG
Flame-retardant indoor/outdoor cables with 12 or 24 single-mode fibers E9/125; non-metallic, stranded
loose tube design, glass yarn armor and LZSH™ jacket
Design and special properties
Example: A-DQ(BN)H (1x4+1x8) E9/125 0.36F3.5 + 0.22H18 LG
A-DQ(BN)H (1x4+1x8) E9/125 0.36F3.5 + 0.22H18 LG
A-DQ(BN)H 3x8 E9/125 0.36F3.5 + 0.22H18 LG
- Light, thin and robust FutureLink™ MPC – multi-purpose cables
- FutureLink MPC (multi-purpose cables) can be employed both indoors and outdoors for campus backbone
and building backbone (riser) cabling as well as for the cabling between floor distributors
- The cables can be installed in conduits, ducts and be buried directly in the ground (microbe resistant)
- Minibundle (loose tube) design
- Single-layer stranded construction, S/Z stranding
- Dry cable core by swellable elements in the cable core, water blocking to IEC 60794-1-F5
- All-dielectric cable construction requires no grounding or bonding
- Enhanced rodent protection by laminated glass yarns
- Outer jacket LSZH™, UV resistant
- Low-smoke to IEC 61034 and zero-halogen (LSZH™)
- Flame-retardant to IEC 60332-1, non-corrosive to IEC 60754-2 (FRNC) and DIN VDE 0472 part 813
- The used Corning® single-mode fibers SMF-28e® are fully compliant to standard ITU-T G.652.D
(reduced OH- peak) showing low attenuation throughout the 1285 nm to 1625 nm wavelength range
- Telcordia standard (Bellcore) for fiber and loose tube coloring
- Cable design according to Corning standard
Colouring
Fibers:
tubes with 4 fibers: blue, orange, green, brown
tubes with 8 fibers: blue, orange, green, brown, grey, white, red, black
Buffer tubes:
cable (1x4+1x8): blue – with 4 fibers, orange – with 8 fibers
cable 3x8: blue, orange, green
Filling elements: natural, to fill up the cable cores
Outer jacket: black
Cable printing:
<meter marking>
<double sine>
CORNING FutureLink/MPC
<cable designation>
Method: Hot-foil printing, white
•Optical and mechanical: |
| •Mode field diameter at 1310 nm |
[μm] |
9.2 ± 0.4 |
| •Cladding diameter |
[μm] |
125.0 ± 0.7 |
| •Coating diameter |
[μm] |
245 ± 5 |
| •Typical attenuation at 1310 nm |
[dB/km] |
≤ 0.36 |
| •Typical attenuation at 1550 nm |
[dB/km] |
≤ 0.22 |
| •Typical attenuation at 1383 nm |
[dB/km] |
≤ 0.36 |
| •Dispersion in the range 1285 to 1330 nm |
[ps/(nm*km)] |
≤ 3.4 |
| •Typical dispersion in the range 1285 to 1330 nm |
[ps/(nm*km)] |
≤ 2,7 |
| •Dispersion at 1550 nm |
[ps/(nm*km)] |
≤ 18 |
| •Cable cutoff Wavelength (λcc) |
[nm] |
≤ 1260 |
| •The fibers are fully in compliance with ITU-T G.652.D and annexes |
Technical cable characteristics
CCS reserves the right to improve, enhance, and modify the features and specifications of CCS’s products without prior notification. The information in this data sheet has been reproduced in good faith and is accurate, to the best of CCS’s knowledge, at the time of printing. However, CCS makes no warranty as to, and will not be liable on any basis for, the information contained within this data sheet.
©2009 Agtec Ireland Limited
Unit 21, Ashbourne Business Centre, Ballybin Road, Ashbourne, Co. Meath, Ireland.
t: 353-1-8359565 f: 353-1-8359657 e: sales@agtec.ie
Optical Fiber shortcuts...
Fiber
UG
Aerial
Engineered Solutions
Fiber Optic Cable Accessories
