Optical Fiber / Fiber / UG
Fiber optic duct cables with 8,12,16, 24, 32, 40, 48, 96 and 144 single-mode fibers E9/125 SMF 28e™,
stranded loose tube design, “filled” cable core, aluminum tape as additional moisture barrier and PE-jacket
Design and special properties
Example: A-DSF(L)2Y 2x8 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 2x6 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 4x6 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 1x8 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 2x8 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 3x8 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 4x8 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 5x8 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 6x8 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 8x12 E9/125 0.36F3.5 + 0.22H18 LG
A-DSF(L)2Y 12x12 E9/125 0.36F3.5 + 0.22H18 LG
- Particularly light, thin and robust cables
- Cables for blowing or pulling into duct systems, laying in concrete channels or on
cable racks
- Minibundle (loose tube) design
- Single-layer stranded construction, S/Z stranding
- Loose buffer tubes filled with a thixotropic gel
- Single-mode fi bers fully compliant to standard ITU G.652 D (reduced OH- peak) showing low attenuation throughout the 1285 nm to 1625 nm wavelength range
- Central steel strength and anti-buckling element
- Cable core filled up with a cable filling compound
- Laminated aluminum tape as additional moisture barrier
- Outer jacket PE, black, UV resistant
- Cable design according to customer requirements
- The offered cables are fully compliant to the relevant IEC specifications, especially IEC 60793-1, 2 and IEC 60794-3
Colouring
Fibers:
tubes with 8 fibers:
white, red, yellow, green, blue, grey, brown, black
tubes with 12 fibers:
white, red, yellow, green, blue, grey, brown, black, violet, orange, pink, turquoise
Buffer tubes:
cable type 1x8: black
cable type 2x8 or 2x6: black, brown
cable type 3x8: black, brown, red
cable type 4x8 or 4x6: black, brown, red, orange
cable type 5x8: black, brown, red, orange, yellow
cable type 6x8: black, brown, red, orange, yellow, green
cable type 8x12: black, brown, red, orange, yellow, green, blue, violet
cable type 12x12: black, brown, red, orange, yellow, green, blue, violet, grey, white, pink, turquoise
Filling elements: natural, to fill up the cable cores
Outer jacket: black
Cable printing:
<<meter>
EIRCOM
CORNING
<year>
OPTICAL CABLE
<fiber count>
SMF
Method: Hot-foil printing
•Optical and mechanical: |
| •Mode field diameter at 1310 nm |
[μm] |
9.2 ± 0.4 |
| •Cladding diameter |
[μm] |
125.0 ± 0.7 |
| •Coating diameter |
[μm] |
245 ± 5 |
| •Typical attenuation at 1310 nm |
[dB/km] |
≤ 0.36 |
| •Typical attenuation at 1550 nm |
[dB/km] |
≤ 0.22 |
| •Typical attenuation at 1383 nm |
[dB/km] |
≤ 0.36 |
| •Dispersion in the range 1285 to 1330 nm |
[ps/(nm*km)] |
≤ 3.5 |
| •Dispersion at 1550 nm |
[ps/(nm*km)] |
≤ 18 |
| •Cable cutoff Wavelength (λcc) |
[nm] |
≤ 1260 |
•The fibers are fully in compliance with ITU G.652.D and annexes.
•Other options are available on request. |
Characteristics of fibers E9/125 SMF 28e™ - low water peak fiber -
CCS reserves the right to improve, enhance, and modify the features and specifications of CCS’s products without prior notification. The information in this data sheet has been reproduced in good faith and is accurate, to the best of CCS’s knowledge, at the time of printing. However, CCS makes no warranty as to, and will not be liable on any basis for, the information contained within this data sheet.
©2009 Agtec Ireland Limited
Unit 21, Ashbourne Business Centre, Ballybin Road, Ashbourne, Co. Meath, Ireland.
t: 353-1-8359565 f: 353-1-8359657 e: sales@agtec.ie
Optical Fiber shortcuts...
Fiber
UG
Aerial
Engineered Solutions
Fiber Optic Cable Accessories
